After our recent interview with the legendary Dave Clarke, we found ourselves asking, ‘Why haven’t we covered his style yet?’ It’s time to change that.

Dave Clarke is an English DJ, producer, radio presenter, and photographer based in Amsterdam. Originally from the UK, he has been at the forefront of techno since breaking through with Archive One in 1995. Over the past 30 years, many have come and gone, but his star has continued to shine due to his commitment to underground techno, the associated culture, and new music. If you’re after an extended biography, this isn’t the place. It’s a testament to his influence that you’ll find plenty written about him, so let’s move on to musically dissecting his magic instead.

In this edition of Beat Dissected, we’re looking at ‘Way of Life’ from his 2003 album Devil’s Advocate, featuring Chicago house legend DJ Rush. We won’t create a carbon copy of his track, but we will explore some techniques used to come close to his legendary sound.

Here’s the original track:

And here’s what we’re making today:

Spec

Tempo

137 BPM

Swing

52%

Sounds

Ableton 12

Remember – click any image to enlarge!

Step 1: The kicks

Create a new MIDI track and load in Drum Rack. From the Core Library, find and load the samples onto the Drum Rack Pads, with “Kick 909 1.aif” onto D2# and “Kick 808 Thud.wav” onto D2. The instruments will default to C3 under Play, so let’s leave them unless otherwise specified.

On both kicks, adjust Decay to 60.0 s.

Now, let’s add some effects to the 909 kick’s sample group. Load Kick EQ 4 and adjust Freq settings to 2.72 kHz on band five and 15.6 kHz on band eight. Add a bell curve filter on band seven and set it to 8.80 kHz.

Add the Mildly Aggressive compressor as-is.

To give it that pushing sound, we’re creating a longer decay or tail, with the Drums Room reverb. Adjust the settings to Predelay 1.21 ms, Size 0.32, Decay 1.34s, Diffuse -9.3 dB and Dry/Wet 14%.

Lastly, for the 808 kick, load “Kick EQ 4” into the sample group.

Build a four-beat pattern for both kicks.

Step 2: Hi-hats

Add the samples “Hihat Closed 808 2.wav” onto C2#, “Hihat Open 909.aif” B1 and “Hihat Open 707.aif” C2 in your Drum Rack.

First let’s give our track some movement with a rolling 16 beat hi-hat by placing an 808 closed hi-hat on every step. Pan Vol to 11R.

Starting with bar one, place the 909 open hi-hat on every other bar. Pan Vol to 17R.

Next, place the offbeat 707 open hi-hat as one step on every third of a 1/4 bar as shown in the pattern. Trim the sample to about 0:00:175. Transpose to +1 st. Pan Vol to 7R.

Step 3: Shaker and clap

Add the “Shaker Short” sample into A1# of the Drum Rack. Turn up the volume to 2.0 dB and pan to 17L.

Load “Clap 909.aif” into A1 of the Drum Rack. Turn the decay up to 60.0 s to give a bigger Chicago warehouse vibe. Dial up the volume to 6.0 dB to balance it into the mix.

For the shaker, we’re going to copy the 909 open hi-hat pattern from the previous step so we can layer upon it.

Now, place a clap on every fifth and thirteenth beat of the bar.

Step 4: Conga and tom

Who doesn’t love a good conga to remind us that drum machines existed before DAWs? Load the “Conga 808 Hi.aif” sample onto two Drum Rack Pads, G1# and G1.

Under Play, set the first conga to G2 and the second to C3. Pan both to 20R and set Vol to -3.0 dB.

Load “Tom 909 Mid 1.aif” onto the F1# Pad. Adjust the volume to 5.0 dB.For both congas, program in the MIDI pattern as shown.

Plug in the following steps to give it a galloping, driving feel.

Step 5: Organ stab

Now, let’s build up our house melody with a classic organ stab by loading “Organ Bandstand.adg” into a new MIDI track. Open the Wavetable and set Transpose to 1 st.

Adjust the settings to Filter Reso 24%, Pulse Width 24%, Sync 32%, Attack 2.57 ms, Release 32 and Unison 10%. Transpose to 1 st to make the pitch higher.

Let’s load in “House for to go.adv” to the left to build our chords. Change knobs to Shift 1 +4 st, Shift 2 +7 st and Shift 3 +12 st.

Ok, let’s add the stock Delay, copy the settings and dial down Feedback to 15% and Dry/Wet to 19%.

Finally, add the Wide Ambience reverb and bring down the Dry/Wet to 21%.

Program in the following pattern.

Step 6: Master bus processing

Before we export our master track, set the tracks as House Stab track -7.0 dB, Drum Rack -10.0 dB and Main (Master in Ableton 11 and earlier) to -6.0dB. This will give us enough headroom to prevent distortion in our master.

In order to build up our mastering chain and preserve the raw, DAWless (hardware only) sound of the track, let’s add the vinyl distortion “Crack.adv” to our Main channel. Set Volume to 0.25 and Density to 23.0.

Next, add Master Wide & Warm, click Heavy Comp and copy the settings to Bass Gain (M) 1.00 dB, Mid Gain (D) 5.12 dB, Mid Freq (S) 1.50 kHz, High Gain (M) 1.00 dB, Comp Thresh -32.4 dB and Comp Gain 6.02 dB.

Let’s add the Glue Compressor to give the track more of a pumping sound and manage the levels. Add the Soft Clip and set the Attack to .3, Release .4, Ratio 4, Threshold -20 dB, Makeup 6.00 dB, Range 50.0 dB and Dry/Wet 80%.

To complete our mastering chain, we will add the Lookahead limiter to prevent volume peaking and change Mode to Soft Clip. Group the effects together to have more control over the chain.

Vamp Acid is a music producer, live techno artist, host and curator of Hrdwre.io based in Berlin. Find Vamp Acid on Instagram.

Follow Attack Magazine

Attack Store

View Store

The Secrets Book Bundle

Get 2 best-selling music production books. Buy more, spend less.

Buy Now

Dance Music Producers’ Power Book Bundle

Get 2 best-selling music production books. Buy more, spend less.

Buy Now

The Producers’ Book Bundle

Get 3 best-selling music production books. Buy more, spend less.

Buy Now

The Secrets of Techno Production

The definitive guide to making techno.

Buy Now

The Secrets of Dance Music Production

The world-leading book on dance music production. Comes with samples too.

Buy Now

The Producer’s Manual

Everything you need to take a mix, from initial recording to final master.

Buy Now

FinalFinal T-Shirt

A hilarious tribute to our never-ending battle with file naming chaos.

Buy Now

Secretos de la Producción de Música Dance

La guía definitiva para producir música electrónica de vanguardia.

Buy Now

Max for Live: Texture

Add texture simple to any sound. Simple an effective.

.

Buy Now

Max For Live: Chance Engine

Add controlled yet random fluctuations to your most important parameters

Buy Now

Boots ‘n’ Cats House T-Shirt

The sound of house music as a big back print now!

Buy Now

Untz Untz Techno T-Shirt

Big back print techno inspired t-shirt.

Buy Now

Underground Resistance: The Final Frontier Poster

Anti corporate, political, powerful and progressive the power house of Jeff Mills, Robert Hood and "Mad" Mike Banks needs little introduction.

View More

Max for Live: Pulse Engine

A unique generative MIDI device from Manifest Audio.

Buy Now

3rd February, 2025

Leave a Reply

Your email address will not be published. Required fields are marked *

You currently have an ad blocker installed

Attack Magazine is funded by advertising revenue. To help support our original content, please consider whitelisting Attack in your ad blocker software.

Find out how

x

    A WEEKLY SELECTION OF OUR BEST ARTICLES DELIVERED TO YOUR INBOX